Craft Tutorial#7- Sprial Earrings
Online Competition Still Running - Click Here
We are still running our Online Competition for the Best Craft Tips until the end of August- Click here to go to the post
Craft Tutorial #7 Simple Spiral Earrings
What You Need-All Items available at Fern Gully Stamps
A ball point Pen that you can take ink out of (approx 5-10mm thick)
20 gauge wire
2 Ear hooks
2 head pins
2 beads
Colour Marker
Round nose pliers
Flat nose pliers
Wire Cutters
Step 1-Measure 2 lengths of 20cm of straight 20 gauge wire
Mark 6cm on each wire
Bend both wires at the 6cm mark at the same time 90 degree angle

Step 2-Place the short end inside the hole in the pen
Hold with you thumb and press the long side of the wire against the outside of the pen
Step 3-Keep holding firmly with your thumb as you pull the wire out to the side 
Step 4-Still holding the wire firmly with your thumb wrap the remaining wire around the pen


Step 5-Make sure the spiral is even
Remove the wires from the pen

Step 6-Very gently separate the wires

Hold them together they should be even, if not adjust them
Put a loop in the end of the straight wire
Place a bead onto a head pin, trim the wire 8mm from the bead and form a loop with round nose pliers- Click here to go to the Basic Loop Tutorial
Attach this bead to the loop on the straight wire
Finally attach an ear wire to the top where the wire bends
Leave a Reply
