Quick Ideas for Christmas
Don’t forget to check out our NEW PRODUCTS PAGE click here
Want other Christmas Ideas? Click here
Some times you just need an idea not a whole step by step tutorial so below are photos of several Christmas cards with a quick description of each. All materials are from Ferngully Stamps.
This Card has Metallic pink card A5 folded, black and white Polka Dot paper and ribbon, Reindeer stamp on textured pink card. Punches used-Medium circle punch (pink) and large Fiskars round scallop punch (black)

This Card has metallic blue A5 card folded, Polka dot paper, Black textured paper across the middle. Holly stamp with white embossing powder, Silver/Clear Merry Christmas sticker that has been coloured black with a permanent marker. Punches used- Medium circle (black), large round scallop (blue) Fiskars large circle (white)

This Card has black A5 card folded, 2 types of decorative Christmas papers, black ribbon, holly stamp. Punches used- medium circle(white) and Fiskars medium square scallop punch (red).

This Card has black A5 card folded, 2 types of Christmas decorative papers, red card for the mat, black ribbon. -Punches used- medium circle(white) , Fiskars medium square scallop punch (red) and Fiskars large scallop round punch (olive)

This Card has black A5 card folded, black ribbon, metallic silver paper, 3-D- lift up stickers and silver/clear Merry Christmas sticker coloured black with a permanent marker

This card has metallic blue A5 card folded, Decorative snow flake paper, reindeer stamp with red embossing powder, silver/clear Merry Christmas sticker coloured red with a permanent marker. The punches used- Fiskars large round scallop (red) and then it has had a medium circle punched in the middle. The red flower shape has double sided foam around the outside so it sits up higher than the blue Reindeer.

This card has Black A5 card folded, metallic silver paper in the middle, silver border stickers, 3-D- Lift up xmas tree sticker. Punches used- Small star punch (aqua) with rhinestones in the middle of each and Fiskars large scallop circle .

This card has Red A5 card folded, decorative christmas black bird paper, black card for behind decorative paper. Medium round punch used to make black bird. Click here for black bird tutorial

Craft Tutorial#17- Reindeer Gift Card
Want more Christmas Card ideas? click here
Craft Tutorial #17-Reindeer Gift Card
This is a clever idea, great for work friends, school mates or teachers.
You will need: All items available at Ferngully Stamps
Reindeer Stamp - Only available at Ferngully Stamp
Message Stamp- Only available at Ferngully Stamps 
White card for medium circle
White card -4cm x 9cm
Green card for large round scallop
Green or brown card to fold over bag- 5.5cm x 7cm
Fiskars large round scallop punch
Fiskars medium circle or round scallop punch
Black or Brown ink pad
Coloured markers- red and green
Snap lock clear bag -approx 5cm x 9cm
Chocolate balls
Double sided tape or adhesive
Follow the steps below to create this cute gift card-
Step 1- Punch a medium circle from white card and use black or brown ink to stamp you reindeer onto white circle. Colour the Holly in red and green and the reindeer nose in red. Option- you can edge the sides with ink using a dauber.

Step 2- With dark green card punch a large scalloped circle

Step 3- Attach your Reindeer image to the centre of the green scalloped circle

Step 4- Stamp your message onto the 4cmx 9cm white card using black or brown ink

Step 5- Attach your stamped message to the right side of the reindeer and on a slight downward angle

Step 6-Fold your Green or Brown 5.5cm x 7cm card in half .

Step 7-Fill your bag with chocolate balls & place the card over the top of your snap lock bag, staple the folded card.

Step 8-Attach your Reindeer and message to the front of the folded card using double sided tape

Options- You can attach 2 different coloured large Scalloped circles to each other for a little extra touch.


Craft Tutorial #16 Folded Santa Card

Want more Christmas Card ideas click here
Tutorial #16- Folded Santa Card
Another Great Christmas Card Idea
You Will Need: All items available at Ferngully Stamps
Note: These measurements are in inches
Black card 8½ ” x 5½”
Santa:
-Decorative Santa paper - 1¾” x 4
- Red Mat 1¾” x 3⅞”
Greeting:
-White mat for stamped image 2⅝”x 3⅝”
-Red mat 2¾”x 3¾”
Santa Face:
-Decorative Santa paper 1¼” x 1¼”
- Red card Fiskars square scallop punch
Double sided tape
Black ribbon
Greeting stamp
Ink for stamping
Follow the instructions below to make this simple yet effective card
Step 1-
Cut your black card to size 8½ ” x 5½” and Score card in half
Step 2-
Place card in cutter at 3½” and cut from 1¼” to 6¼” 
Step 3-Score your card on the wider side of the slit at -
1¼” , 2¼” and 3¼” then turn card 180ᵒ at score at 2¼” as shown

Step 4- Now fold from the 1¼” Mountain fold

Step 5- Then Valley fold

Step 6- Mountain fold

Step 7- Valley then Mountain and then press flat

Step 8- Centre your Decorative Santa paper - 1¾” x 4 onto the red 1¾” x 3⅞” mat using double sided tape
Tie a bow using 2 lengths of black ribbon and using double sided tape to attach, bring the ends of the ribbon around the back of the red mat

Step 9- Put double sided tape on the back of the red mat

Step 10- Attach the red mat to the front left of the card

Step 11-Attach your Santa face to the square scallop red card

Step 12-Place double sided tape on the bottom corner only

Step 13- Attach the Santa face to the front right as shown

Step 14- Stamp your image onto your white mat and edge around the card with a dauber

Step 15- Attach your stamped image to the red 2¾”x 3¾” mat using double sided tape. On the back put double sided tape on the bottom only as shown

Step 16-When you attach your stamped image line it up with the half way fold of the card. Don’t attach it too far down in the crease. It should all line up when pressed flat and able to fit into a standard size envelope.

Craft Tutorial #15 - Little Black Bird Christmas Card
Dont forget to check out our new products page - New to Ferngully Stamps - docrafts Creativity 
Tutorial #15 Little Black Bird Christmas Card
Make this cute little bird, a creative way of using your round paper punch
You will Need: All items available at Ferngully Stamps
Round Paper Punch Medium
Dark olive card A5 folded in half
Mat 1- Patterned Paper-8cm x 14.8cm- black bird and holy
Textured red card- 2 strips -2cm x 14.8cm and 1cm x 14.8cm
Adhesive
Double sided tape
Double sided foam
Edging scissors
For the bird-
Dark olive card 6cm x 6cm
White card 5cm x 5cm
scraps of - Black, Red and Gold card
Follow instructions below to make this beautiful card
Step 1- Body-Using your punch, punch out 1 black circle and put aside.
Face-Punch out 1 red circle then put the red circle back into the punch almost all the way and punch making a pointy oval shape as shown. This should be about half the size of the black full circle or just under.
Tail- Punch a black circle and then put the circle back into the punch only a quarter of the way and punch making a small pointy oval shape
Beak- Do the same as you did for the tail using the gold card
Eye-Cut out a black circle and put a white circle in the middle for the eye or you could use a stick on dolls eye, in this example I have cut out from black and white polka dot paper.

Step 2- Assembling the bird-
Apply adhesive the back of the red face and attach to one side of the black circle

Step 3-Add the tail to the back of the bird and tilt up slightly and add the beak to the front

Step 4- Cut 2 thin strips of black card- approx 2cm and cut 4 small strips approx 5mm
attach 2 small strips to the bottom of one long strip, place them on an angle so they stick out like birds feet
Make 2 of these and attach to the bottom of the bird.

Step 5- This is what your bird should look like, you can have the face larger than this if you like as shown in the next step.

Step 6- Centre & attach your white 5cmx5cm card onto the olive 6cm x6xm card and attach your bird to the center of the white card.

Step 7-Optional-
trim one side of your patterned paper with edging scissors and attach to the front of the card as shown

Step 8- Attach your 2 red strips of paper to left side of the patterned paper leaving a space between them a
s shown

Step 9- Using double sided foam attach your bird to the bottom left of the card, leaving about 1.5cm at the bottom as shown.

Craft Tutorial # 13-Baubles Card

Craft Tutorials #13- Christmas Baubles Card
What You Need: All Items available at Fern Gully Stamps
Small Carl Swirl Punch
Large round Punch (or cut our with scissors)
White card 18.5 x21cm
Patterned Paper-Pale mauve clouds 10.5 x 18.5cm
Silver metallic paper-scrap
For the baubles- Dark blue textured card & 2 different but matching patterned papers
Adhesive (glue pen)
Double sided tape
Merry Christmas silver sticker
silver border sticker
silver rhinestones or stars
Follow steps below to make this merry little card
Step 1 Using a small swirl punch- punch 3 swirls from silver metallic paper
Step 2 Using the same silver metallic paper cut 3 small rectangles 2cm x 6mm

Step 3 Attach each swirl to the back of a 2×6mm silver rectangle ,centred as shown- this is you Bauble top

Step 4 Cut 3 circles that are 4-4.5cm at widest point-
One in plain dark blue textured card
2 in different patterned papers in matching colours

Step 5 Attach the Bauble tops to the top of the cut out circles centered

Step 6 Decorated the plain Bauble
On the plain dark blue bauble place silver border stickers along the bottom and top
Place rhinestones or stars in the centre of the blue Bauble

Step 7 Cut 3 thin strips of silver metallic paper approx 10cm long and 2mm wide

Step 8 Place double sided tape on the front of the white folded card and attach the mauve cloud paper, this should cover the entire front of the card

Step 9 Arrange your baubles on the front of the cloud paper where you would like them, do not attach yet

Step 10 Remove the Baubles and place your thin silver strips on the the cloud paper. Trim the excess at the top.

Step 11 Apply adhesive to back of the Baubles and stick in place, the silver strips should just touch the top of the silver swirl

Step 12 One of the Bauble may sit over the top of one of the silver strips.

Step 13 Attach a Merry Christmas Sticker to the bottom left corner

You could do some more decorating by adding glitter to the baubles or more rhinestones
Craft Tutorial #12- Christmas Tree Card

Craft Tutorial #12- Create a Christmas Tree out of punched shapes
What You Need: All Items available at Fern Gully Stamps
A small to medium size punch- Heart shape, flower or star
Mat 1 - Metallic silver/pale pink Paper 6.5cm x 7cm
Card- Metallic pale pink textured card folded in half
bright pink card to punch hearts shapes out of
Border and message stickers
Small decorative silver stickers (small parts that can be taken out ) or cut up a border sticker to use instead
Double sided tape
Double sided foam
Adhesive
Permanent coloured pen-Pink
Step 1-
You can Make your silver message and border stickers pink by using a bright pink permanent marker

Step 2- Punch 10 bright pink Heart shapes


Step 3- Place you heart shapes upside down
Apply adhesive to the bottom right of one heart as shown

Step 4-Align another heart on top of the first heart. The left bump on the top heart should be on top of the right bump of the bottom heart, so you now see 3 bumps at the bottom as shown.

Step 5- Apply adhesive to the right side of the top heart and add a third heart

Step 6-Continue to make a row of 4 hearts, a row of 3 hearts, a row of 2 hearts and then a single heart.
I will refer to these rows as - top single heart is row 1, then next one down with 2 hearts is row 2, then row 3 and at the bottom with 4 hearts row 4.
Step 7-
Joining the rows-Apply Adhesive to the 4th row (bottom row)- Apply it to the front, near the top,
align row 3 (3 hearts) to the top of row 4.

Step 8- Apply adhesive to the top of the 3rd row (3 hearts) and align the 2nd row (2 hearts)with the top of row 3.

Step 9- Apply adhesive to the 2 row and add the single heart at the top.
Step 10- Make another tree, this time using only 3 rows

Step 11-To decorate the tree use small pieces of silver stickers or cut up a part of a border sticker


Step 12- Place the small stickers between each heart or randomly.

Step 13-Put a border around Mat 1 using border stickers - 5mm in from the edges.

Step 14-Put double sided foam on the back of both trees and place them on the front of Mat 1.

Step 15-Place a border around the front of the folded card 5mm in from the edge using border stickers.

Step 16-Place double sided tape to the back of Mat 1 and place it 5mm in from the top border.

Step 17- Put a message on the front of the card, below Mat 1

You can use a larger heart punch to make a larger Christmas tree, you can also make the Christmas tree out of other shapes such a flower punch.


Craft Tutorials #11- Match-it Paper & Stickers
Craft Tutorial #11 Match it Printed Paper and Outline Stickers
What You Need:All Items available at Fern Gully Stamps
Printed Paper Planes with Gold Outline stickers -Doodey brand
Blue shimmer card 20cm x17cm folded
Mat 1- Red textured card 10cm x 9cm
Mat 2- Decorative paper with coloured words10cm x7.5cm
sheer Ribbon-40cm
Double sided tape
Double sided foam

Step 1- Carefully cut around the aeroplane printed paper

Step2- Peel the matching outline sticker off

Step 3- Position the outline sticker onto the cut out paper and put aside for now


Step 4-Using the ribbon bring it around the front of the folded card near the bottom and tie a bow on the inside of the card, so that from the front you just see a line of ribbon


Step 5- Place double sided tape on the back of Mat 1 -red card and position Mat 1 on to the front of the folded card 1cm in from the right edge

Step 6- Place double sided tape onto the back of mat 2-Decorative paper. Center Mat 2 on top of Mat 1. You should be able to see about 1cm of Mat 1 (the red card) on the left and right.


Step 7-Place a small piece of double sided foam onto the back of the cut out aeroplane.

Step 8-Position the aeroplane on an angle near the center of the card. It should cover part of the folded card as well as part of Mat 1 and Mat 2.
Anoth
er Card using chocolate brown and blue with a
red aeroplane
Craft Tutorial#10- Card Making using Clear Acetate


Craft Tutorial #10- Clear Acetate -You can stamp any image onto acetate to create a 3 dimensional look. Follow the instuctions below to create this wonderful Wedding Card.

What you need- All items available from Fern Gully Stamps
Sheet of clear Acetate

staz on ink Black Cherry
Stamp-Champagne Glass
plain cream paper
Black Card folded in half -21cm x17cm
Mat one - Red textured Card 9×14.5cm
Mat two -Patterned paper -gold hearts on cream
Tube glitter glue gold
2 charms or beads -6mm cream
6 small 4mm jump rings
2 head pins
card to match mat one-9cmx1.5cm
Message in gold approx 4cmx1cm
double sided tape
double sided foam

Step 1- Using Staz On ink stamp 2 champagne glass images onto the clear acetate- careful it can slip
Step 2-
After the ink is dry, Cu
t around the outside of both stamped images

Step 3- Using Staz On ink stamp 2 more images -Champagne glass onto plain cream paper

Step 3- Cut out part of the image on the cream paper- half the glass see photo

Step 4- Apply a dab of glue to the front of the cut out image on the cream paper. Place it behind the acetate stamped image and line it up. carefully press it in place so it sticks. do this to both champagne glass images

Step 5- Using glitter glue, dot a few drops on the top of the glass image

Step 6- Attach a charm or bead (each bead needs a head pin and a loop on each side) to 3 small connected jump rings

Step 7-Open the last jump ring and place it around the bottom of the acetate champagne glass image, repeat for the other

Step 8-Place double sided tape on the back of Mat two (patterned paper) and center it on top of mat one (red card)

Step 9-Put a message in the center of the 9cm x 1.5cm red card

Step 10-Place the red card with the message across the bottom of the card- about 1.5cm up from the bottom edge of the mat one (red card) make sure you can see a bit of the patterned paper at the bottom as well

Step 11- Cut a small piece of double side foam and place it on the back of the acetate stamped image, where the cream cut out image is so that you can will not see the tape from the front

Step 12-Position your 2 champagne glasses on top of Mat two (patterned paper) put them on a slight angle

Step 13-Put double side tape on the back of the Mat two (red card) and center onto your folded black card


Craft Tutorial #9- 3-D Picture

Craft Tutorials #9- 3-D Picture Card


What you need-All items available at Fern Gully Stamps
3-D Pictures - In this tutorial we have used-little Angle guiding a Unicorn
Pale pink card folded in half- 17cm long x 15cm heigh
Mat 1- light purple card-12.5×12.5cm
Mat 2 - white card -11×11cm
scraps of card same size as gift cards
Scissors
Double sided tape
Thick double sided foam
hole Punch
eyelet
Ribbon or silk cord
hammer and eyelet tool
Use the Steps Below to create a beautiful 3 dimentional card or use it a picture to frame- Fern Gully has a large variety of images and styles to choose from
Step 1- Carefully cut around each of the pictures 


Step 2- Put double sided tape (thin) on the back of your main picture (largest picture)

Step 3- Remove backing from tape and centre your main picture onto Mat 1

Step 4- Put a piece of thick double sided foam/tape on the back of each picture in the centre

Step 5- Each picture is designed to sit on an angle however the image lines up. when I refer to the pictures- 1 is the main picture, 2 is the 2nd largest and so on
The main (largest) picture that is mounted onto mat 1 is set aside- we will build the remaining picture and attach it to picture 1 last
Place the 2nd picture on a surface and hold the 3rd picture up to it to see where it lines up- take note of the complete picture
when you are happy remove the backing tape on the 3rd picture and stick in place on top of the 2nd picture

Step 6- Align the 4th picture on top of the 3rd
Then Align the rest of the pictures from largest to smallest

Step 7- Align the stacked pictues to picture 1 (the main picture that is mounted to mat 1)
Step 8- Centre mat 1 on top of mat 2
Place Mat 2 (with the stacked pictures on it) at the top of the folded card leaving 1cm at the top and 4cm at the bottom with approximately 1.5cm at each side.

Step 9- Stick one of the messages at the bottom of the card

Step 10- Gift Cards- This example has 2 gift cards
Gift Card 1 - Attach the main gift card to a piece of card and trim around the edges

Step 11-Cut the 3 pictures out

Step 12- Place thick double sided tape on the back of each picture

Step 13-Using the same technique as the main card- mount the 3 pictures from largest to smallest on top of each other aligning the picture as you go.

Step 14- Punch a hole at the top of the gift card

Step 15- Select a small metal eyelet

Step 16- Place the eyelet into the hole from the front

Step 17- Turn the card face down with the eyelet in place and put an eyelet tool into the eyelet
Hammer it into place

Step 18- Gift card 2- Double sided - You could also have 2 single sided as an option
Cut out the 2 gift card pictures, attach one to a piece of card and trim the card leaving a 1mm border
attach the other picture to other side of the card
Punch a hole at the top and add an eyelet using the same technique as before
Insert silk cord or ribbon to both gift tags


Craft Tutorial#7- Sprial Earrings
Online Competition Still Running - Click Here
We are still running our Online Competition for the Best Craft Tips until the end of August- Click here to go to the post
Craft Tutorial #7 Simple Spiral Earrings
What You Need-All Items available at Fern Gully Stamps
A ball point Pen that you can take ink out of (approx 5-10mm thick)
20 gauge wire
2 Ear hooks
2 head pins
2 beads
Colour Marker
Round nose pliers
Flat nose pliers
Wire Cutters
Step 1-Measure 2 lengths of 20cm of straight 20 gauge wire
Mark 6cm on each wire
Bend both wires at the 6cm mark at the same time 90 degree angle

Step 2-Place the short end inside the hole in the pen
Hold with you thumb and press the long side of the wire against the outside of the pen
Step 3-Keep holding firmly with your thumb as you pull the wire out to the side 
Step 4-Still holding the wire firmly with your thumb wrap the remaining wire around the pen


Step 5-Make sure the spiral is even
Remove the wires from the pen

Step 6-Very gently separate the wires

Hold them together they should be even, if not adjust them
Put a loop in the end of the straight wire
Place a bead onto a head pin, trim the wire 8mm from the bead and form a loop with round nose pliers- Click here to go to the Basic Loop Tutorial
Attach this bead to the loop on the straight wire
Finally attach an ear wire to the top where the wire bends



